5BBL 304 Stainless Steel Pub Brewing Systems For Beer Production
With Steam Heating
The Fermentor SDT (300L~1000L) is a large size pilot scale
fermentation systems and the top driving mechanism is applied. The
head plate lifting system by air cylinder and linear motion guide
is adapted in standard specification.
The system can be used for microbial, insect and mammalian cell
culturing procedures. The stainless steel (SUS 316L) vessel and the
whole attachments can be sterilized automatically or manually in
this pilot scale fermentation system and the whole fermentation
procedures can be also performed automatically. The measured values
of the procedures and monitored data are graphically displayed in
the 8.5" color LCD screen and all the control parameters can be
adjusted in the graphic mode.
Applications area: Beer Bars, Hotels, Restaurants, Micro
brewery,etc.
Product features:
1. Appearance clean and generous: The tank is polished by mirror,
and the equipment is bright;
2. Good insulation effect: The equipment is divided into two kinds
of heat insulation and cold insulation, which is the best to ensure
the temperature of the beer brewing process;
3. Visualization operation: the equipment is controlled by PLC, and
the fermentation tank is equipped with a glass tube level gauge,
which is convenient for visual operation;
4. Low energy consumption: environmental protection, energy saving,
low power consumption, saving energy consumption of about 20%;
Specification
| Pub beer brewing plant |
| Brewing System | Components | Specification |
| Grain Milling System | Rolling Miller
Flexible Auger
Silo | Double roller
Speed differential
Stainless steel screw
PVC pipe
SUS304 |
| Heating way | 3 kinds heating way | electric heating, direct fire gas heating ,steam jacket heating |
| Brewhouse System | Mash tun | Steam jacket on bottom and side
Agitator inside
Wort hydrator mounted top of mash tun
|
| Lauter tun | Grain rake with VFD
Laser cutting V-wire False Bottom
Easy clean and detachable sparging spray ring
Multihole wort collect ring(optional)
Anti-rinser(optional) |
| Kettle/Whirlpool Tun | Steam Jacket on bottom and side
Steam vent with condensate ring for kettle stack |
| Heat exchanger | SUS304 plate |
| Fermentation System | Fermentation Tank | Glycol cooling jacket on cone and bottom
Side or top manway
CIP arm and CO2 blow off arm
Germany import Kieselmann Mechanical relief valve
Shockproof pressure gauge
Rotating racking arm
Dry hopping port
Carbonation stone
Sight level |
| Yeast Adding Tank | SUS304 Stainless Steel |
| Glycol Chilling System | Glycol Water tank | Insulated conical top and sloped bottom |
| Cold Water Tank | Dimple plate on side wall |
| Chiller | |
| CIP Cleaning System | Caustic Tank | electric heating element inside
SUS304 full welded |
| Sterilization Tank |
| Transfer&Control |
| Control System | Brewing and fermetation process Controlling | Manual/Semi-automatic/Automatic
PLC control with touch screen for special |
| 5bbl brewery equipment | 5bbl Brewhouse – steam jacket heating/electrical heating/direct
fired heating
Mash vessel – grist hydrator, agitator, frequency drive
Lauter tun - false bottom, rake system, sparging
Boiling Kettle/Whirlpool tank- Tangential whirlpool entry, with
heating system
Pumps with ABB motor
Stainless steel 304 working platform
Plate heat exchanger – 304 or 316 plates
5bbl/5bbl fermentation tanks/bright beer tanks
6bbl HLT
Glycol cooling system(glycol chiller, glycol tank, glycol pump)
CIP system
Grain mill system(grain miller, flex auger, grist case)
PLC Siemens touch screen Control panel with UL/CSA rated
Quick-wear parts! Complete engineering support and onsite installation! |
Mash system
1.System is mainly composed by mash/lauter tun, boiling pot,
whirlpool tank, hops adding equipment etc.
2.The main body of mash tun, mash copper system all using
international standards, high-quality 304 stainless steel.
3.The manufacture is using of modern automatic plasma & laser
cutting and the protection of pure argon gas welding and other
technology.
4.The full mirror polished technology for the inside of the tanks
which expose to materials such as wheat mash; external matte
polished to ensure customers with high quality and low price,
beautiful mash system.
Fermentation system
1.The inner of the fermentation tank are adopted 304 stainless
steel. Use polyurethane to keep warm. The outside scarfskin is
according to the customer’s requirement.You can choose stainless
steel polishing, carbon steel, spray finishing and so on.
2.Adopted the international standard of fermentation technology,
diverse methods to control the temperature. The inner surface of
the tank is mirror-polished. The standard is≤0.8um ≤0.6um ≤0.2um.
Completely meet the demand of PLC and sterilize system.
3.The cooling jacket can achieve all countries’ standard, supply
Miller, arch, corrugated plate and so on. Meet all kinds of demand
of cooling technology of coolant and pressure.
