Stainless Steel 3 Vessel Brewhouse with 50-100mm PU Insulation
1.Mirror Polishing
beer brewing
Inside Polishing: Overall polishing to 0.2-0.4μm without dead
corner .beer brewing
Outside Polishing: Mirror polishing, smooth enough and passivating treatment.beer brewing
Purpose: The tank itself has high precision and small details of
the tanks have to be observed by a telescope.
Function: To make tanks become tidy and smooth, beautiful and
durable.beer brew
beer brewinging
2.100% TIG Welding
beebeer brewingr brewing
All welding is TIG welding.
All welding is double side welding.beer brewing
Purpose: The use of argon on the protection of metal welding
material, So that welding can not be in contact with oxygen in the
air, thus preventing the oxidation of welding consumables.beer brewing
Function: Make tanks become durable and strong.
bebeer brewinger brewing
3.Plate bottom/Filter plate
Equipped in Mash/Lauter tank, Laser cutting T-wires, Plate gap:
0.8mmbeebeer brewingr brewing
This filter plate is made on a complete stainless by CNC lathe, it
is strong, filter fast and leak no grist.
Function: Use for Separating wort and impurities.
4.Plow knife/Raker knife
Equipped in Mash/Lauter tank, used for stirring the wort, and
mashing.
Stir evenly and fast, to make the wort generate a high
concentration.
Its operation will be controlled by the motor and the reduction gear.
Based on our brewery formula, filtration will cost 1 hour.
5. Top Quality Components
1) All product are leading parts in stainless steel 304 and food
grate;
2) The complete prefabricated unit, well welded, fine surface,
prolong the service life of the equipment;
3) Perfect design, top quality accessories, to minimize the
equipment’s bug rate.
6. Components of Brewhouse
| Name | Size/ Volume/ Quantity | Technical Parameter |
| Mash/ Lauter | Double wall stainless steel | 1. Material: thickness: 3.0mm; |
| Gross capacity:1300L | 2. External: thickness: 1.5mm; |
| Useful capacity:1000L Outer :Ø1400mm; | 3. Cylinder: thickness: 2.0mm. |
| Total height: 2600 mm; | 4. Inner surface treatment: welds grinded to Ra 0.4µm. |
| Filter board gap≤0.7mm | 5. Insulation: Polyurethane-thickness 100 mm. |
| Agitator with power; | 6. Temperature way: Double metal thermometer |
| - 1pc | 7. Outsourcing surface: Weld polishing processing |
| 8. Jacket Pressure: design pressure 0.3 MPa, working pressure
<0.2 MPa. |
| 9. CIP 360 degrees Omni bearing cleaning |
| Boiling /Whirlpool | Double wall stainless steel | 1. Material: thickness: 3.0mm; |
| Gross capacity:1300L | 2. External: thickness: 1.5mm; |
| Useful capacity:1000L Outer :Ø1400 mm; | 3. Cylinder: thickness: 2.0mm. |
| Total height: 2600 mm; | 4. Inner surface treatment: welds grinded to Ra 0.4µm. |
| Mash tank kettle agitator with power | 5. Insulation: Polyurethane-thickness 100 mm. |
| Adding: Blender | 6. Temperature way: Double metal thermometer |
| - 1pc | 7. Outsourcing surface: Weld polishing processing |
| 8. Jacket Pressure: design pressure 0.3 MPa, working pressure
<0.2 MPa. |
| 9. CIP 360 degrees Omni bearing cleaning |
| Hot water tank | Double wall stainless steel | 1. Material: Inner(SUS304),thickness: 3.0mm; |
| Gross capacity:1300L | 2. External-Jacket(SUS 304 thickness: 3.0mm; |
| Useful capacity:1000L Outer :Ø1400 mm; | 3. Cylinder (sharp type, SUS304), thickness: 3.0mm. |
| Total height: 2600 mm; | 4. Inner surface treatment: welds grinded to Ra 0.6µm. |
| 5. Insulation: Polyurethane-thickness 100 mm. |
| 6. Temperature way: Double metal thermometer |
| 7. Outsourcing surface: Weld polishing processing |
| 8. Jacket Pressure: design pressure 0.3 MPa, working pressure
<0.2 MPa. |
| 9. CIP 360 degrees Omni bearing cleaning |
